2017년 6월 10일 토요일

Paper jam

Paper jam

I am caught on the parts of the device and do it without the paper jam (I chew a paper jam and am jammed) being a printer or a copier and paper supplies it normally or being exhausted and put the state that I cannot print. I am called the paper jam.

Table of contents

Cause

  • I used bent paper, broken paper, paper of bad quality.
It is more likely to occur when I make prints using the backing paper of the handbill for the print of) personal memo that it is not a thing to show test print ・( another person.
A paper feed may not operate normally when I use paper including the moisture.
In addition, when I put the seal label for the errand in a printer many times and am going to print it and I put a seal label (the thing that a part without a seal in particular becomes only the detachment paper) which it is not originally sold production to as printer use in a printer and am going to print it, paper is slippery on a roller because a detachment paper does it slipperily and fails in a paper feed and a seal comes off inside and sticks to the parts, and a paper jam may occur.
  • The inside of the device is dirty.
When the paper feed roller of the device, a discharge roller are dirty, paper may be close together with the adhesive strength of the dirt.
  • When when a device is worn out, a device is defective.
When there is a trouble at the device, naturally a problem is more likely to happen for a paper feed and discharge of the paper.
In the case of rubber specifications, a paper feed roller wears down, and a paper feed may not be possible normally.
  • When a way of the loading of the paper is bad.
When I handle the paper properly, and it is necessary to prepare it, and to put straight it and uses paper with being and adds paper while I operate it, I fail in a paper feed and may occur.

Actions to be taken, prophylaxis

  • I do not use the paper of bad quality.
When I remove the too terrible paper even if it is the memo purpose for the individual and test print and reuse the backing paper of the handbill, though I use it, a thing of the inappropriate thickness turns at the printer and compromises, and a punch hole is vacant and prevents you from using the paper with the trace that a stapler stop, and was done.
  • I sometimes clean the inside of the device.
I clean a device inside particularly roller part using air dusters regularly. Paper (cleaning sheet) which lets you go through in a device in household appliance general merchandising stores, and cleans the roller is sold.
  • When I feel abnormality, I ask it for repair.
A paper jam becomes terrible and gets into the place that paper clogged up is torn, and is not produced when I just use it though there is an abnormality and may cause other trouble.
  • I handle the paper properly, and I prepare it, and enter and I mix the paper different of thickness and the kind and do not use it.

Allied item

Outside link

This article is taken from the Japanese Wikipedia Paper jam

This article is distributed by cc-by-sa or GFDL license in accordance with the provisions of Wikipedia.

Wikipedia and Tranpedia does not guarantee the accuracy of this document. See our disclaimer for more information.

In addition, Tranpedia is simply not responsible for any show is only by translating the writings of foreign licenses that are compatible with CC-BY-SA license information.

0 개의 댓글:

댓글 쓰기