Fiat rebbe re-M1935 heavy machine gun
The Fiat rebbe re-M1935 heavy machine gun (Fiat rebbe re-M1935 じゅうきかんじゅう) is a heavy machine gun adopted in Italy in 1935.
 Fiat rebbe re-M1935 | |
| Summary | |
|---|---|
| Kind | Heavy machine gun |
| Production country |  Italian kingdom |
| Design and fabrication | Fiat S.p.A. |
| Performance | |
| Diameter | 8mm |
| The barrel head | 653mm |
| Use ammunition | 8 X 59mmRB ブレダ |
| 装弾数 | 50 (給弾帯) |
| Operation method | Etaac |
| Full length | 1,250mm |
| Weight | 18.1 kg (I do not include a tripod) |
| Discharge speed | 500/m |
| Muzzle muzzle velocity | 792m/s |
| Effective range | 1,000m (up to 5,200m) |
Development process
The Italian military keenly realized lack of power of the Fiat rebbe re-M1914 heavy machine gun using the small diameter ammunition through World War I and the battle in the colony in African each place and I entered in the 1930s and started the power increase of the heavy machine gun. The circumstances of this neighborhood are common with the Japanese army.
As for the Shinju machine gun, the air-cooled thing using the 8 X 59mmRB ブレダ bullet was found. The trial manufacture was offered to ブレダ and Fiat. I finished the trial manufacture gun as an improved model of rebbe re-M1914 in Fiat in development, 1934.
Appearance of the Fiat rebbe re-M1935 heavy machine gun
Because the new ammunition was more powerful than a conventional 6.5*52mm bullet markedly, a thing corresponding to this ammunition became the prime object of the improvement. At first I ensured the security of the operation in a thing with the two steps-type delay mechanism though it was a straight delayed by barrel retreat by adding a normal lock pin to the strange operation method called the delay ditch roebuck. However, this change caused the new fault that cook off was easy to happen.
In addition, because unction mechanism to ammunition was unpopular, I was going to make it easy instead of comprising 加速抽筒 and a tapered chamber, to cut a groove in a cartridge chamber, and to perform 抽筒, but it is external after all, and an unction device will be added to these measures not ten minutes.
給弾機構 was changed from the loading shelf using the rifle clip of M1914 to the normal nonseparation-type metal link 50 belt. I can use this belt as 100 or more by connecting ammunition as a substitute for pin.
Apparently the exchange-type barrel and an outstanding heat radiation cover were the biggest characteristics, but just comprised a water cooling cover pipe with some guns which was remodeled, and was made from M1914.
As for the new machine gun, it was adopted a regulation as Fiat M14/35 (Mitragliatrice Fiat Modello.14/35) in 1935. In general, I am known as merely M35 or M1935.
The post
Because Fiat rebbe re-M1935 was made a regulation as provisional measures before the production of ブレダ M37 heavy machine guns getting on track, a production period was until 1935 through 1940, but M1935 in itself was used until World War II end. Because the real military unit deployment waited to keep quantity of the ammunition, I emptied in 1937.
This article is taken from the Japanese Wikipedia Fiat rebbe re-M1935 heavy machine gun
This article is distributed by cc-by-sa or GFDL license in accordance with the provisions of Wikipedia.
In addition, Tranpedia is simply not responsible for any show is only by translating the writings of foreign licenses that are compatible with CC-BY-SA license information.
0 개의 댓글:
댓글 쓰기