WiRES-II

It is the VoIP broadcast system of amateur radio communications using the Internet that Vertex Standard (existing YAESU MUSEN) proposed and I tie an amateur radio communications Internet connection kit called WIRES-II controller HRI-100 between a PC and radio machines and communicate with WiRES-II (wires two). I go on approximately 1,400 in the country, and the number of stations (the node station) where I tied an amateur radio communications Internet connection kit to is used all over the world now. You must mail WiRES-II ID application enclosed in a kit to YAESU MUSEN Corporation to get ID necessary for access without being able to establish the node station only by having purchased an amateur radio communications Internet connection kit. In addition, without a connectivity kit, even anyone can enjoy WiRES-II easily if it is stable, and there is the radio machine which the node station which can be connected and a DTMF signal and a tone squelch circuit can start near. There is WIRES-X of the succeeding standard now.

Table of contents

Usage (the user station)

1. I add the frequency of the radio machine and the frequency of the node station which wants to be connected. In addition, I set a tone squelch circuit. (what I use connection → after receiving it for a while because other stations may use the node station )※ then in the case of the node station that a tone squelch circuit is set is desirable.
2. I add D to #, the last first and transmit the node station and the room (later description) number that want to be connected. (I send *#9999D which is a cutting number if it has been already connected to other node station and rooms)
3. I communicate. ※The consecutive transmission more than three minutes is not sent to a partner.
4. I transmit cutting number (#9999D)

Room (RoundQSORoom)

The plural nodes station can be connected; is, so to speak, something like room. All the users of the node station in the room can participate in communication.

Establishment of the node station

I can establish it by oneself without the node station which can be connected near. The PC which met connectivity kit "HRI-100" and a condition, connection environment (more than ADSL8Mbps, I need global IP) to the Internet, the radio machine with the DATA terminal and a node number are necessary on this occasion. ^[1]

Amateur radio communications using other Internet

eQSO IRLP D-STAR Echolink

References

1. ^ "setting environment check." YAESU MUSEN. April 6, 2016 reading.

Outside link

• Vertex Standard WIRES-II homepage
• Introduction to JQ1YDA club WiRES-II

This "WiRES-II" is a computer-related item, but contents are insufficient. I demand correction, a cooperator correcting by this article (Portal: computer).

It is acquired by "https://ja.wikipedia.org/w/index.php?title=WiRES-II&oldid=61327973"

This article is taken from the Japanese Wikipedia WiRES-II

This article is distributed by cc-by-sa or GFDL license in accordance with the provisions of Wikipedia.

Wikipedia and Tranpedia does not guarantee the accuracy of this document. See our disclaimer for more information.

In addition, Tranpedia is simply not responsible for any show is only by translating the writings of foreign licenses that are compatible with CC-BY-SA license information.