Road Switcher
Made. A format that is regarded as the front of the Road Switcher.
Road Switcher(Road switcher) is mainly used by picking up from various places, collecting it, or traveling while delivering it, and it is used in a maneuvering place. Most of them are. It is distinguished that it is in charge of replacement only.
table of contents
Road and Switcher in the USA
In order to assume driving outside the tunnel, it is imperative that the load switcher be able to deliver speed suitable for main road traveling. Also, since the movement in the fore-and-aft direction becomes frequent when replacing, it is necessary to secure visibility to both sides. Therefore, the type of car body is adopted.
The driver's cab is offset to one side in the front-rear direction of the car body, and since the bonnet that houses the engine etc etc is located before and behind it, the safety at the time of collision is higher than for pure replacement. The rear view is better than the one of the box type car body type. The prestige of this style is (Alco) made.
Due to the above-mentioned features, today's road switchers are used for both replacement and main line.
UK example
, The term "road switcher" is not used, but () is classified into this.
Examples of Japan
In Japan,,,, is equivalent to road and switcher in the original.
Related item
*
Acquired from ""
Post Date : 2018-02-25 22:00
This article is taken from the Japanese Wikipedia Road Switcher
This article is distributed by cc-by-sa or GFDL license in accordance with the provisions of Wikipedia.
In addition, This site is simply not responsible for any show is only by translating the writings of foreign licenses that are compatible with CC-BY-SA license information.
0 개의 댓글:
댓글 쓰기