Binder (agricultural machinery)

Binder(reaper- binder, or binder) is one that is mainly used in the harvesting work of and. You can coalesce at the same time with crops that have reached the harvest season.

"Binder" is the meaning of etymology, butreaper(reaper) It is a machine that evolved from, and it also has the function of harvesting. It is also simply referred to as a reaper (reaper).

Although it is remarkable labor saving due to popularization, it is used for active work in fields with small area, narrow fields of railroads, farmers who are particular about sun drying. In addition, compared to, although the ability is significantly inferior, since the price is significantly lower, it is used in small farmers.

Development history

Small 1st grinding binder

The binder is also called a power reaper binder from its function. Prior to the advent of this agricultural machine, farmers at the harvest stage were very busy as it was necessary for people to manipulate reaping manually. So in the Meiji Era, Yamashita Tsunayoshi who was doing swordsmithing in Nishi Mikawa developed a rice crane, powered by an engine for local farmers, the burden of agricultural work got lighter and yield increased and spread to farmers in the vicinity I did. [ __ This revolutionary machine which continues to bundle while pulling with gasoline engine powered by a blade that reciprocates rice and wheat has appeared on the stage of history in the latter half of the 1930's and then spread widely in the public, More efficient harvesting work became possible.

Binder, and then many improvements and ingenuity have been done to date, but there is no major change in its basic principle.

Construction

Hemp for binder (jute string)

The binder is roughly composed of a trigger section (divider), a harvesting section, a binding section, and a running section.

If the crop is in an upright state, reaping is easy, but in the case of lodging with a typhoon or rainy season, it is responsible for bringing the crock up to a condition where the crop can be reaped by machine. The harvesting section is chosen according to the number of threads, but for binders one for one or two is prevalent. Some have three articles, but they are not common. In the cohesion part, bundle a certain amount of bundle with a string, string, or synthetic string, and then automatically discharge it. The traveling part is a device for moving the binder, and it is one-wheel type or two-wheel type. Specifications of tires to be fitted are shallow grooves, for general dry weather and wide wetlands with special patterns.

Engine of small horsepower is adopted, and it often carries 4 to 6 horsepower air-cooled 4 cycle gasoline engine.

Related item

| Wikimedia Commons has categories related to****. — | —

• • \ - Agricultural machinery integrated with binder, etc.

Acquired from ""

Post Date : 2018-02-26 20:00

This article is taken from the Japanese Wikipedia Binder (agricultural machinery)

This article is distributed by cc-by-sa or GFDL license in accordance with the provisions of Wikipedia.

Wikipedia and Tranpedia does not guarantee the accuracy of this document. See our disclaimer for more information.

In addition, This site is simply not responsible for any show is only by translating the writings of foreign licenses that are compatible with CC-BY-SA license information.